Masalah dan trouble yang sering terjadi pada printer

Masalah dan trouble yang sering terjadi pada printer, berikut ?

* Printer tidak dapat mencetak
* Printer kelihatan mencetak, namun tidak ada sesuatu yang tertulis diatas kertas
* Halaman cetakan tidak lengkap atau karakter yang dicetak aneh
* Lampu indikator hanya berkedip-kedip terus saat diberikan perintah mencetak
* Kertas tidak dapat masuk ke printer sebagaimana mestinya
* Kertas tidak dapat keluar dari printer
* Hasil cetakan bergaris -garis
* Beberapa fitur yang dijanjikan oleh produsen printer tidak dapat bekerja
* Printer menjadi lambat dalam mencetak
* Font yang tercetak tidak sama dengan yang tampil di layar monitor

Bila anda pernah menemui masalah -masalah diatas, mungkin tips-tips berikut ini dapat anda
gunakan sebelum anda memutuskan untuk membawa printer anda ke bengkel.

 

1. Printer tidak dapat mencetak

Ada beberapa kemungkinan yang dapat menyebabkan printer tidak dapat mencetak. Anda dapat
mulai untuk memeriksa hal-hal berikut:

1. Periksa koneksi printer dengan jaringan listrik. Pastikan kabel power printer telah
dicolokkan ke konektor (stop kontak) listrik dengan sempurna .
2. Pastikan saklar “on-off” printer atau tombol switch printer dalam posisi “on”. Permasalahan
yang diakibatkan oleh tidak adanya power untuk printer ini biasanya ditandai dengan tidak
menyalanya LED (lampu indikator) dari printer tersebut, selama printer menggunakan LED
untuk indikator power.
3. Periksa sambungan kabel data printer, apakah sudah terhubung dengan port pararel / port
USB di komputer dengan benar.
4. Cobalah untuk menggunakan kabel data printer yang lain (pinjam teman) sebagai
percobaan. Pernah terjadi kasus yang diakibatkan oleh putusnya tembaga dari salah satu
kabel data di tengah -tengah kabel sehingga data dari komputer tidak dapat sampai ke printer.
5. Apabila anda menggunakan sistem operasi Microsoft® Windows®, dan anda menggunakan
printer yang terhubung ke port pararel di komputer anda, coba jalankan perintah yang
dicetak tebal berikut ini di jendela MSDOS® Prompt:
6. C:\>dir >>LPT1
7. Maksud dari perintah diatas adalah untuk membelokkan hasil tampilan perintah “dir”
(perintah untuk penampilkan daftar isi dari suatu direktori) dari yang seharusnya ke monitor
namun dialihkan ke port pararel komputer.
8. Pastikan anda telah melakukan instalasi driver untuk printer tersebut.
9. Pastikan anda telah memilih driver yang tepat untuk printer yang anda gunakan.
10. Pastikan anda telah memilih port yang tepat untuk printer anda. Lihat opsi ini melalui menu
printer poperties.
11. Coba gunakan aplikasi teks editor standard untuk sistem operasi anda untuk mencetak
sesuatu (misalnya notepad). Jika aplikasi teks editor anda dapat mencetak, maka
kemungkinan besar kesalahan bukan pada printer anda.
12. Cobalah untuk merubah setting printer anda menjadi “Default Printer” atau cobalah untuk
melakukan instalasi ulang driver untuk printer anda dengan nama printer yang lain dan
ubahlah instalasi baru tersebut sebagai “Default Printer”.
13. Pastikan anda memiliki space hardisk yang mencukupi. Kadang jika buffer tidak cukup
maka data tidak dapat dikirim ke printer dengan sempurna.
14. Cobalah untuk merubah setting “spooler” untuk printer anda melalui menu properties
printer. Fitur “spooler” ini digunakan dengan tujuan agar anda tetap dapat menjalankan
aplikasi ketika dilakukan pencetakan dokumen.
15. Cek apakah ada resource yang konflik dengan port yang digunakan oleh printer anda.
Gunakan bantuan “hardware troubleshooter” apabila terjadi konflik.

Kasus ini mungkin juga disebabkan oleh port komputer anda yang bermasalah. Untuk
mengetahuinya, apabila langkah-langkah diatas sudah anda lakukan namun tidak menemukan “titik
terang”, cobalah untuk memindah koneksi port printer anda ke port lain (misal USB1 ke USB3) atau
cobalah printer anda di komputer lain.

2. Printer kelihatan mencetak, namun tidak ada sesuatu yang tertulis diatas kertas

Kasus ini umumnya disebabkan oleh kosongnya tinta atau toner printer atau habisnya karbon yang
ada di pita printer anda . Cobalah untuk mengganti tinta, toner atau pita printer dengan yang baru.
Jangan lupa untuk memeriksa apakah ada sesuatu yang menghalangi head dengan kertas (misalnya
plastik segel pada printer baru). Ada kasus pada printer yang menggunakan tinta, dimana tinta yang
masih berada di head printer telah kering karena printer lama tidak digunakan sehingga terjadi
penyumbatan. Khusus untuk printer yang headnya dapat dilepas dengan mudah, masalah ini kadang
dapat diselesaikan dengan cara yang sederhana berikut:
1. Lepaskan head dan catridge dari printer.
2. Pisahkan catridge tinta dari head.
3. Pastikan anda tidak memegang -megang rangkaian elektronik yang ada disekitar head printer
yang telah anda lepas karena dapat merusakkannya.
4. Ambil air panas, tuangkan dalam mangkok.
5. Celupkan ujung head ke dalam air panas yang ada dalam mangkok. Perhatikan jangan
sampai air menyentuh rangkaian elektronika yang ada di sekitar head karena dapat
merusakkannya !

6. Goyang -goyangkan head tersebut hingga tinta yang ada di dalam head mencair.
7. Ulangi langkah pencelupan (4 hingga 6) diatas dengan air panas yang baru hingga air panas
yang baru tetap bening (tidak terkontaminasi tinta yang keluar dari head).
8. Keringkan head dengan kain yang halus hingga benar-benar kering.
9. Satukan kembali catridge tinta dengan head. Disarankan untuk menggunakan catridge yang
masih baru.
10. Pasang kembali head dan catridge ke printer dan cobalah untuk mencetak.

Bila anda telah mela kukan langkah -langkah pembersihan head seperti diatas namun hasilnya tetap
sama, kemungkinan penyumbatan terjadi hingga bagian pipa penyaluran tinta. Bila hal ini terjadi,
cobalah untuk menguapi saluran tinta head dengan uap panas hingga kira-kira tinta yang ada di
dalam pipa mencair, kemudian ulangi langkah pembersihan head seperti diatas.

3. Halaman cetakan tidak lengkap atau karakter yang dicetak aneh

Kasus ini bisa disebabkan oleh beberapa hal. Coba ikuti petunjuk berikut :
1. Periksa hubungan printer dengan komputer, apakah hubungannya sudah sempurna.
2. Periksa kabel data yang anda gunakan. Cobalah mengganti dengan kabel data yang lain
(jangan langsung beli, pinjam teman dulu kabel data untuk memastikan kerusakan ini agar
anda tidak rugi).
3. Periksa pula driver yang anda gunakan untuk printer, apakah sudah sesuai atau belum. Bila
perlu, update atau install ulang driver dengan versi terbaru yang dikeluarkan secara resmi
oleh perusahaan pembuat printer.
4. Periksa apakah dokumen atau data yang anda cetak rusak. Kesalahan pembacaan data yang
disebabkan oleh kerusakan data dapat mengakibatkan hasil cetakan tidak lengkap atau
karakter yang dicetak tidak lengkap.
5. Pastikan pengaturan halaman pada aplikasi yang anda gunakan telah benar.
6. Pastikan anda masih memiliki kapasitas hardisk dan memori yang cukup untuk menuliskan
buffer data.
7. Periksa apakah printer anda memerlukan suatu prosedur maintenance pada saat tertentu.
Untuk tipe printer tertentu, mungkin saja anda perlu untuk mengatur ulang setting printer
anda setelah periode pemakaian tertentu.

4. Lampu indikator hanya berkedip-kedip terus saat diberikan perintah mencetak

Ada beberapa kemungkinan yang dapat menjadi penyebab hal ini seperti:
1. Catridge printer belum terpasang atau belum terpasang dengan sempurna .
2. Posisi pemasangan catridge tidak tepat.
3. Catridge yang dipasang pada printer tidak cocok untuk printer tersebut.
4. Tidak ada kertas di printer.
5. Setelah kertas yang dimuat belum ditekan tombol kertas masuk/resume.
6. Ada kertas yang tersumbat (nyangkut) di dalam printer.
7. Periksa apakah “pintu” printer telah ditutup dengan sempurna.
Jika kemungkinan diatas tidak ada yang sesuai untuk mengatasi masalah anda, cobalah untuk
mematikan printer beberapa saat dan kemudian menghidupkannya kembali.

5. Kertas tidak dapat masuk ke printer sebagaimana mestinya

Silakan mencoba petunjuk berikut untuk mengatasi masalah ini:
1. Cobalah untuk memuat ulang kertas ke dalam printer.
2. Bila ada, atur switch pilihan ukuran kertas sesuai dengan ukurannya.
3. Periksa kemungkinan terlalu banyaknya le mbaran kertas yang termuat.
4. Periksa apakah kertas dalam kondisi baik, tidak berkeriput atau melengkung.
5. Periksa apakah ukuran kertas adalah sama untuk setiap lembarnya.
6. Periksa apakah ada kertas lain yang tersumbat di dalam printer.
7. Periksa apakah “pintu” printer sudah tertutup dengan sempurna.

6. Kertas tidak dapat keluar dari printer

Untuk melepaskan kertas yang tersumbat (nyangkut) di dalam printer, ikuti langkah-langkah berikut:
1. Matikan power printer.
2. Lepaskan kabel power printer dari konektor (stop kontak) listrik.
3. Keluarkan kertas dari penampan (bila ada).
4. Buka pintu printer.
5. Apabila dimungkinkan, lepaskan pintu printer dengan menarik pegangan di kedua sisinya
kemudian angkat keatas.
6. Buka pemisah kertas (bila ada).
7. Pegang kertas yang tersumbat itu di kedua sisinya dan tarik keluar pelan-pelan.
8. Setelah kertas berhasil dikeluarkan, tutup kembali pemisah kertas (bila ada).
9. Pasang kembali pintu printer.
10. Tutup pintu printer.
11. Masukkan kertas ke penampan dan cobalah untuk mencetak kembali.

7. Hasil cetakan bergaris-garis

Untuk printer tinta, ada kemungkinan head printer kotor. Bersihkan head printer menggunakan
cara penanganan kasus 2 diatas. Apabila tidak memecahkan masalah, cobalah ganti catridge tinta
dengan yang baru dan biarkan semalaman, setelah itu coba gunakan lagi untuk mencetak. Untuk
printer tipe dot-matrix, kasus ini kemungkinan disebabkan oleh adanya komponen penggerak head
yang bermasalah. Pernah terjadi kasus seperti ini pada printer dot -matrik yang disebabkan oleh
matinya salah satu transistor penggerak head. Pernah pula kasus ini disebabkan oleh rusaknya
kabel data yang mengirimkan informasi ke head printer. Kalau kasus ini terjadi, mau tidak mau
anda harus membawa printer dot-matrix anda ke tukang servis untuk mengganti komponen yang
ada, kecuali anda paham tentang elektronika.

8. Beberapa fitur yang dijanjikan oleh produsen printer tidak dapat bekerja

Pastikan anda menggunakan driver printer yang dikeluarkan secara resmi oleh produsen pembuat
printer untuk printer anda. Pastikan pula driver tersebut dirancang untuk sistem operasi yang anda
gunakan. Cobalah untuk menggunakan versi terbaru dari driver yang dikeluarkan. Pastikan pula
anda telah memenuhi syarat yang diajukan oleh produsen printer untuk menggunakan suatu fitur
tertentu.

9. Printer menjadi lambat dalam mencetak

Kasus ini kebanyakan disebabkan karena penuhnya memori, baik memori komputer maupun memori
yang ada di dalam printer. Coba ikuti langkah-langkah berikut untuk mengatasi masalah ini:
1. Bila anda menggunakan sistem operasi Microsoft ® Windows® XP/2000/NT, pastikan anda
masih memiliki sisa ruang hardisk sekurang-kurangnya 120 MB.
2. Pastikan anda tidak menjalankan aplikasi lain yang menghabis kan memori.
3. Pastikan komputer anda bersih dari “virus” komputer.
4. Periksa kembali konfigurasi printer anda.
5. Cobalah untuk melakukan defragmentasi hardisk.
6. Bila hal ini tidak memecahkan masalah, cobalah untuk membandingkan kecepatan
mencetak dari printer anda di komputer lain. Apabila di komputer lain ternyata bisa lebih
cepat, kemungkinan komponen-komponen mainboard yang menangani komunikasi antara
komputer dengan printer anda sudah mulai “aus”.

10. Font yang tercetak tidak sama dengan yang tampil di layar monitor

Apakah anda menggunakan “True Type Font”? Penggunaan jenis font tersebut akan
menghasilkan cetakan yang sama dengan apa yang ada pada layar. Cobalah untuk mengganti
font yang anda gunakan dengan font yang berjenis “True Type Font”. Periksa pula apakah file
font yang anda gunakan tersedia di komputer anda.

Apabila anda menggunakan printer yang berjenis postscript, matikan opsi penggantian “True
Type Font” dengan “PostScript Font” melalui menu “Printer Preferences”.
Pastikan pula driver printer anda tidak bermasalah. Cobalah untuk melakukan instalasi ulang
driver menggunakan nama yang b erbeda atau update driver anda.

Selamat Mencoba!

Jika anda mengalami kegagalan silahkan hubungi orang yang berpengalaman dibidangnya

many people have brought their printer

PRINTER

1.  Read the book.  I cannot begin to tell you how many people have brought their printer to my shop with the User Manual and paid my wife (no computer expert) $32.50 to sit-down, read the book, and fix the printer.  Unfortunately, some printer books aren’t worth reading…

2.  Check the manufacturer’s web site.  The problem you are having has most likely happened before.  If the manufacturer has a good web site, you may find the answer there and save a lot of time, money, and frustration.  Go to our Manufacturer Links page to get there fast.

3.  Is it plugged-in?  Make sure the printer is plugged into a live outlet.  If it is plugged into a surge protector, make sure it is on.  Try moving it from the surge protector to a known-good wall outlet.

4.  Is it on?  Ok, you can’t print and Windows, etc. says it can’t find the printer.  Make sure the darn thing is turned on and there are no error lights (LEDs) lit.  If there are error lights, refer to the user manual/manufacturer’s web site.  You should hear the print mechanism initialize when power is applied and most printers have at least one light which will be illuminated when it is on.

5.  Is it on-line?  Most printers have and on-line LED and button or the equivalent.  The computer cannot communicate or send stuff to a printer that is not on-line; i.e., not connected to the cable between the printer and computer, and that is what “on-line” literally means.  Again, I have gone to customer sites, pushed the on-line button, and charged them for my time and travel (I try to accomplish at least that much on the phone, but some…).

6.  Is it beeping at you?  Most printers will beep once or twice during or after initialization.  If it beeps more than that or beeps constantly, the poor thing is either hurt or trying to tell you something is wrong.  Look in the manual or go to the web site to learn what it is saying.  Unfortunately, beep code documentation can be hard to find, the beep you hear may not listed, or the meaning of the beep is nebulous.  Most, printers will beep when out of paper or out of ink and those are the most common causes for a printer turning into a road runner.

7.  Does it test-print?  Most printers have a built-in diagnostics program which can be very useful for troubleshooting problems and test-printing without a computer.  They are usually initiated by pressing a button or two while turning on the printer.  Check your user manual.  If the printer test-prints OK, you have probably eliminated the mechanical print mechanism as the problem.

 

8.  Does it have ink or toner?  Is the Ink cartridge full, ribbon installed correctly, or laser cartridge full?  An ink jet printer may have a black and a color cartridge.  Check both of them or at least set the printer to use a cartridge with ink in it.  You can usually extend the life of a laser cartridge long enough to order a new one by removing the cartridge and gently shaking it side-to-side to redistribute the tone.  Sometimes you can get a ribbon going temporally by removing from the printer and manually advancing the ribbon past a worn spot by turning the sprockets.

9.  Is it clean?  Most ink jet printers have a simple user procedure for cleaning the print heads.  You may have to clean them periodically or after the printer has been idle for a few days or weeks.  If you see funny colors or print-outs are missing colors, a cartridge may be empty or a head dirty.  You may have to clean a head many times to get it working again

10.  Does it have paper?  Be sure the paper is installed correctly and there is enough of it.  Most printers have a paper-out detector.  On most dot matrix printers it is a photo diode.  If form-fed paper is not aligned correctly (usually on the left side) the diode won’t see it.  DOS may indicate it has lost communications with a printer which is out of paper instead issuing a paper-out error.

11.  Is it jammed?  Paper jams are frequently the reason my wife is able to fix many printers.  She’s very good at it (and she has smaller fingers than mine).  Always read the manual on how to clear a jam.    Don’t be a “gorilla” with your printer!  You can easily damage a printer (strip gear threads, etc.), or even get hurt, if you do not follow instructions and are not careful.  Turn the power off–unplug it.  You have 110 volts running around the inside many printers.  And print heads, gears, etc. like to nip fingers.

Laser printers have some very fine wires to remove static charges from the paper near the fuser mechanism which will break if you aren’t very careful.  Also, the fuser itself can be very hot (it fuses/melts toner to the paper).

Don’t move a print head unless the instructions direct it.  You can damage the belt, etc.

Address labels cause many paper jams and cannot always be seen.  The old shirt cardboard trick can be used to dislodge them from many printers.  Just feed a shirt cardboard (or cut a piece of like-sized cardboard form a file folder) through like a sheet of paper and wiggle the label loose and out.

Staples, paperclips, dog hair, and cookie crumbs are among the many things we have coaxed out of printers.  A staple will raise havoc with the drum in laser printers.  If you see vertical lines on pages printed by a laser printer (or copy machine), the drum is probably scratched.  Replacing it can be a very expensive repair, indeed.

If jams persist, or the printer won’t feed paper, there is a good chance that gears are stripped or rollers are worn-down or have flat spots.   Fixing this sort of problem may require specialized tools and elaborate alignment procedures and is often best done at a printer repair depot.   It is not usually economically feasible to send low-end ink jet and dot matrix printers, etc. to a repair depot.  Sometimes roller problems can be fixed by cleaning the rollers.

Changing to a different kind of paper may help.  Refer to your user manual for guidance.

On humid days, slightly damp paper can cause jams by sticking together causing more than one sheet to be fed at a time.  Try removing the paper from its tray, etc. and fanning it.  Make sure the edges or corners aren’t curled and the tray is either not too empty or too full.  Read the book…

Then there are those printers which no one can figure-out how to dissemble without damaging them…

12.  Is it wedged?  The printer memory could be full or there may my a glitch caused by a power spike.  Turn-off the printer, wait a few seconds and turn it back

13.  Is it connected? The printer test prints, but it won’t go on line…  Well, is the cable from the printer to the computer connected.  Screw down the DB-25 connector at the computer end and clip the Centronics connector at the printer end (your printer and computer may have different connectors; e.g., USB).   Push-in and wiggle the connectors.

14.  Is it connected to the printer port?  Some SCSI (Small Computer System Interface) are physically identical to the male DB-25 connectors used for standard IBM/IBM-compatible printer ports.  Plugging a printer into a SCSI port can damage the SCSI host board and the printer.

15.  Do you have the correct cable?  Many printers now require an IEEE 1284 and Bi-Directional.  USB cables shouldn’t be longer than 15 feet.

16.  Is the cable good?  Check for bent pins.  Try another cable.

17.  Is it connected properly?  Screw the PC end down and latch the Centronics end at the printer.

18.  Is there something else connected to the printer port?  Disconnect it and uninstall the device drivers for it.

19. Does the printer port have a software security device on it?  These devices attach to the printer port and the printer cable attaches to the device.  They can break.  Try printing without it.

20.  Is the printer port configured correctly in your computer’s BIOS Setup?  Try the various printer modes in your computer’s CMOS Setup. ECP+EPP usually works with bi-directional printers, but others may fix the problem.

21.  Is the correct printer cable/header assembly installed and is it plugged-in right?  I have seen cases where a baby AT motherboard was upgraded, but the printer cable/header assembly from the old motherboard was used and caused problems, but that is very rare. Also, the cable connecting to the motherboard could be backwards or loose.

DOS

22.  Does it print from the DOS prompt?  Try F8 (F8 or hold the Ctrl Key for Win 98) just as Windows starts to boot, select the DOS prompt from the resulting menu, find a non-zero length text file (one that is 1-2K would be a good choice) (e.g., autoexec.bat or something ending in .txt), and print from DOS with:
C:\>type autoexec.bat>lpt1:
or
C:\>type filename.txt>LPT1:

Click Cancel, turn the printer off, unplug the printer cable, wait a few seconds, reconnect the cable, make sure the printer is on with no error lights, restart Windows, and try again.’  Try the various printer modes in your computer’s CMOS Setup. ECP+EPP usually works with bi-directional printers, but others may fix the problem. Try F8 just as Windows starts to boot, select the DOS prompt from the resulting menu, find a non-zero length text file (one that is 1-2K would be a good choice) (e.g., autoexec.bat or something ending in .txt), and print from DOS with:
C:\>type autoexec.bat>lpt1:
or
C:\>type filename.txt>LPT1:
If that works consistently, the problem is probably in Windows.

WINDOWS

23.  Is it set-up properly?  Be sure Windows is set-up correctly with the correct printer driver and something else (another printer, FAX, etc.) is not assigned LPT1: Be sure the printer is set as the default Windows printer. Try it on another desktop computer. If that works, try another printer on the suspect computer.  Uninstalling and reinstalling the printer often fixes problems.   Get rid of duplicate printers.

24.  Does it have a stuck print queue?  Start>Settings>Printers>double click the printer> Printer>Purge Print Documents

25.  Have you used Windows Help to solve the problem? Start>Help>Contents>Troubleshooting>Windows 98 Troubleshooters>Print.

Brian writes: The troubleshooters in win 98 no longer function bacause of updates for security.to use the troubleshooters now you must reinstall TSHOOT.INF and then remove the registry the key {4B106874-DD36-11D0-8B44-00A024DD9EFF} at [HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\ActiveX Compatibility. Then once one is done with the troubleshooters, reinstall the latest update for internet explorer 6.

One should backup the Windows registry before making any chnges to it. Look in regedit help for the procedure… start, run, enter regedit.

26.  Have you used Microsoft’s Knowledge Base?  Start with: Q128345 Troubleshooting Printing Problems in Windows 95/98

Ilmu Ndeso dan Kemenangan SBY

Ilmu Ndeso dan Kemenangan SBY
Ilmu Ndeso dan Kemenangan SBY Djoko Suud Sukahar – detikNews Jakarta – Partai Demokrat (PD) luar biasa. Popularitas Susilo Bambang Yudhoyono (SBY) mampu mengatrol partai ini hingga tidak tertandingi. Perolehan PD ini memberi gambaran SBY terlalu kuat bagi lawan-lawan politiknya. Jabatan presiden untuk kali kedua rasanya tinggal ketok palu. Benarkah begitu? PD sudah diprediksi bakal unggul. Berbagai lembaga survei telah meramal itu. Keunggulannya bukan karena mesin politik partai ini jalan, tetapi lebih dikarenakan SBY. Laki-laki kelahiran Pacitan itu mampu menjadi magnit bagi massa rakyat. Dia dipandang lebih baik dibanding calon presiden yang lain. Dan dia dianggap rakyat sebagai presiden terbaik dibanding presiden yang pernah memerintah negeri ini. Penanganan korupsi adalah poin inti. Sedang sikap andap-asor sebagai nilai tambah bagi popularitasnya. Dua kekuatan itu sering disalahtafsirkan oleh para penafsir politik. Para pakar politik dan politisi yang selalu membuat isu sebagai upaya untuk menjegal masing-masing telah membutakan arus yang membentuk bola salju itu. Kini, ketika pemilihan legislatif (pileg) telah terjadi, maka hampir semua mata terbelalak. PD tampil sebagai kekuatan nomor satu mengalahkan Golkar yang masih merasa ‘jagoan’, dan PDIP yang masih yakin massa fanatiknya tidak bakalan pindah ke lain partai. Bagi penulis, kemenangan PD ini masih belum seberapa. Dalam pilpres beberapa bulan lagi kemenangan yang lebih besar bakal diraih SBY. Itu karena dalam pileg ini ada banyak pemilih berjudi. Berjudi demi lain-lain dengan meredam sejenak gejolak hati kecil. Mereka rela memberikan suaranya ke partai lain. Alasannya antara lain karena duit, karena teman, karena tidak kenal caleg PD, dan karena PD diasumsikan masih cukup kuat memboyong SBY maju ke pilpres. Berbagai alasan itu yang membuatnya harus mengambil keputusan ‘menyumbangkan’ suaranya ke partai lain. Namun dalam pilpres nanti, suara-suara yang terpecah itu bakal utuh. Suara itu akan mengalir ke satu titik. Mereka sudah terbebas dari bantu-membantu. Itu karena mereka sudah tidak lagi melihat partai dan caleg yang perlu dibantu. Mereka akan melupakan segalanya itu. Saat ini terjadi, maka yang dia ingat hanya satu. Siapa tokoh yang santun, siapa tokoh yang berbuat lebih baik untuk negeri ini, kendati sejarah kelak mencatat kehadiran tokoh lain yang lebih baik lagi yang bakal dilahirkan. Indikasi suara mengalir ke satu titik terasakan ketika kita nguping di banyak tempat. Suara-suara ‘tanpa pretensi’ itu meluncur dengan polosnya. Mereka dalam ketidaksiapannya telah menyiapkan diri memilih satu nama. Nama itu muncul karena saringan nurani dan naluri. Itu pula yang membuat pilihan ini sulit digoyang. Untuk itu, bagi saya yang mempraktekkan ‘ilmu ndeso’ sebagai ‘alat’ untuk memprediksi, insyaallah SBY bakal terpilih kembali. Dia akan menduduki jabatannya sebagai presiden Republik Indonesia periode kedua. Dan itu diraih hanya dalam satu kali putaran. Memang ramalan ini bukan ramalan baru. Sebab prediksi ini sudah ditayang detik.com pada Januari tahun 2008 lalu. Namun jika ada tanda-tanda khusus yang secara mistis menanggalkan ramalan itu, maka penulis akan sesegera mungkin merevisinya. Itu sebagai pertanggungjawaban moral. Adakah benar akan begitu? Ini adalah ikhtiar. Ikhtiar manusia. Jika salah itulah manusia, karena hakekatnya kebenaran itu mutlak hak Yang Kuasa. Djoko Suud Sukahar: pemerhati budaya, tinggal di Jakarta. (iy/iy) Sent from Indosat BlackBerry powered by Tetap update informasi di manapun dengan http://m.detik.com dari

The Lazy Man’s WayTo Easy Sex And Romance

“The Lazy Man’s Way
To Easy Sex And Romance
With 20 Or More Women A Month”

How a Strange Discovery of the Alpha Male System™ By a Desperate 22 Year-Old Virgin Hypnotically Draws Women To You…Eager For Anything-Goes Sex…Automatically…No Matter If You’re Old, Young, Dead-Broke or Have Physical Features That Now Turn Women Off

Alone on a Saturday night, watching Friends re-runs and fantasizing about Jennifer Aniston. For years, that’s what I called my love-life.

I was 22 years old. So broke I didn’t have two pennies to rub together. So embarrassed about by my body that I wouldn’t take my shirt off unless I was alone. And after four years at a major party college… I was still a virgin.

Sure, I dated a few women (other guy’s sloppy seconds), but even they never returned my phone calls.

And anytime I’d make a few female friends, it always ended up the same: I’d follow them around like a dog, jumping at the chance to do them a favor or listen to their problems… hoping somehow it would lead to sex, but…

Behind My Back They Just Giggled
And Called Me Their Emotional Tampon.

About the only thing I had going for me was my brain. You see, I’d always been fascinated by psychology and ‘silent mind control’ techniques… you know the ‘hypnotic’ stuff big advertisers use to make you happily open your wallet (and earn billions doing, by the way).

My thinking was, if they can use this stuff to figure out what people want to buy, why can’t the same techniques be used to reveal…

What Makes Women
Go After Certain Men?

I figured it was probably a waste of my time, but I kept on with my research anyway… for 4 years. And what I uncovered changed my love-life in a big, big way.

You see, I went from this depressed, timid guy who always seemed to be wearing ‘invisible underwear’ around women…

To suddenly finding myself in one ‘can’t-miss’ situation after another… where hot, young girls were approaching me… and then literally begging to take me home for X-rated sex!

I’m not kidding.

And It Was So Easy, I’m Genuinely Stumped
Why More Guys Haven’t Come Across These Secrets

I mean, it wasn’t like I changed anything about my basic personality. I still had no money, drove around in a rust-bucket and had less experience between the sheets than a 16 year-old.

All I did was apply the “underground” psychological principles I had discovered. It wasn’t hard… and… anyone can do it. That’s because I found out these techniques are based on powerful ‘mind’ principles you are born with – and are available to all of us.

What that means is, it doesn’t matter how old (or young) you are, if you’re dead-broke or even if you have physical features that you think are turning women off…

Whatever Your Excuse Is,
These Principles Still Work

Just like advertising never fails in getting all sorts of different people to buy.

It’s been nearly two decades since I first discovered these techniques, and it’s been one hell of an emotionally… and… sexually satisfying ride.

These days I sleep every night next to the woman of my dreams (something I never thought would happen). And spend much of my time teaching other men…

The Secrets of ‘Magnetically’ Attracting Women To You…
Without Ever Chasing Them Down…
And Without Ever Having To Approach Them!

You see, once you have these secrets all the ‘work’ of meeting women will be done for you…automatically! You can just ‘flip on’ your magnetic powers of attraction… so to speak… and instantly bring sex, romance and more roaring into your life!

And this isn’t some New Age theory crap. It’s based on the same hush-hush psychological tactics advertisers have used for centuries to get filthy rich. They work for anyone, anywhere and at any time (no matter how desperate you think your situation is right now).

Not too long ago, I packaged up all these secrets in a guide I called How To Become An Alpha Male.

It’s the no-risk, never-fail blueprint on how to ‘magnetically’ attract an endless flow of horny, ready-for-sex women to you… without ever having to play their games or deal with rejection.

Some guys call it the lazy man’s way to easy sex and romance. And here’s a quick look at just a few of the proven techniques I’ll share with you inside:

• 3 ‘magic tricks’ you can start using this weekend that will have women begging to have ‘anything goes’ sex with you (even if they’re married or have boyfriends)! Page 52
• The 7 Step Seduction System that takes you from saying “hello” to a new woman…to sharing orgasms in bed with her… in just one evening! Page 101

9

solves the mysteries of dating

 

 solves the mysteries of dating.By Ray FismanPosted Wednesday, Nov. 7, 2007, at 12:00 PM ET

When economists began broadly applying their theories of rational choice-making, love and marriage were among the first areas they colonized. Nobel Prize winner Gary Becker laid the foundations back in 1973 with his two-part article “A Theory of Marriage.” Becker imagined society as an immense cocktail party with rational-minded daters searching for the most desirable partner who would have them. His analysis predicted a pattern of “positive assortative matching,” where men and women of similar desirability would partner with one another.

While models of dating have proliferated in the years since Becker’s pioneering work, we have not progressed very much in testing his theories, or even answering the most basic dating question, for Becker or anyone else: What, exactly, makes someone desirable? There are, of course, the answers that get regular reinforcement: Men value looks; women value brains, money, and success. But do these old-fashioned stereotypes continue to hold today (if they were true to begin with)?

To figure this out, you could do “field work” at a local bar to observe the choices people make in real dating situations or sift through archived marriage announcements to see who chooses whom. But observed dating and marriage choices are at least as much a result of whom we meet as what we prefer. Doctors marry doctors, lawyers marry lawyers, and economists marry economists, probably not because they actually prefer to do so, but because those are the people they meet in daily life. The same may be true of the tendency to marry someone of one’s own race or religion.

To really understand what people prefer, you need to pair men and women randomly in an experimental dating service and document the decisions they make. And so for a couple of years at a local bar just off the Columbia campus, I ran a speed-dating experiment with two psychologists, Sheena Iyengar and Itamar Simonson, and fellow economist Emir Kamenica. Some of our findings confirm well-worn clichés. But others surprised us.

Speed dating is matchmaking on, well, speed—each male-female pair (we stuck to heterosexual couples) meets for four minutes to size each other up, at which point a whistle blows, signaling the men to get up and move on to the next woman. After each “date,” participants decide if they’d like to see their partner again. For our study, we also asked them to rate their partners’ intelligence, looks, and ambition after each meeting. Each event had between 10 and 20 daters of each gender, and in the course of the evening, every man met every woman and vice versa.

After two years of serving as academic love brokers, we had data on thousands of decisions made by more than 400 daters from Columbia University’s various graduate and professional schools. By combining all of our choice and ratings data with separately collected background information on the daters, we could figure out what made someone desirable by comparing the attributes of daters that attracted a lot of interest for future dates with those that were less popular.

With the obvious qualification that we’re talking here about a four-minute version of love and dating, we found that men did put significantly more weight on their assessment of a partner’s beauty, when choosing, than women did. We also found that women got more dates when they won high marks for looks from research assistants, who were hired for the much sought-after position of hanging out in a bar to rate the dater’s level of attractiveness on a scale of one to 10.

By contrast, intelligence ratings were more than twice as important in predicting women’s choices as men’s. It isn’t exactly that smarts were a complete turnoff for men: They preferred women whom they rated as smarter—but only up to a point. In a survey we did before the speed dating began, participants rated their own intelligence levels, and it turns out that men avoided women whom they perceived to be smarter than themselves. The same held true for measures of career ambition—a woman could be ambitious, just not more ambitious than the man considering her for a date.

When women were the ones choosing, the more intelligence and ambition the men had, the better. So, yes, the stereotypes appear to be true: We males are a gender of fragile egos in search of a pretty face and are threatened by brains or success that exceeds our own. Women, on the other hand, care more about how men think and perform, and they don’t mind being outdone on those scores.

Another clear gender divide, this one less expected, emerged in our findings on racial preferences, reported in a forthcoming article in the Review of Economic Studies. Women of all the races we studied revealed a strong preference for men of their own race: White women were more likely to choose white men; black women preferred black men; East Asian women preferred East Asian men; Hispanic women preferred Hispanic men. But men don’t seem to discriminate based on race when it comes to dating. A woman’s race had no effect on the men’s choices.

Two wrinkles on this: We found no evidence of the stereotype of a white male preference for East Asian women. However, we also found that East Asian women did not discriminate against white men (only against black and Hispanic men). As a result, the white man-Asian woman pairing was the most common form of interracial dating—but because of the women’s neutrality, not the men’s pronounced preference. We also found that regional differences mattered. Daters of both sexes from south of the Mason-Dixon Line revealed much stronger same-race preferences than Northern daters.

Does all of this rational-choice stuff take the romance and mystery out of romance (just as some have accused my fellow economist Joel Waldfogel of taking the Christmas spirit out of Christmas)? I hope not. Our purpose is to understand how life-long relationships are formed. The first step in helping people find love and happiness is to figure out what they’re really looking for in the first place.

JAPANESE DATING: We have over 400,000 members in Japan who are interested in Japanese dating, making new friends and more.

JAPANESE DATING: We have over 400,000 members in Japan who are interested in Japanese dating, making new friends and more. Start Japanese dating today!

Are you interested in meeting and dating Japanese and non-Japanese, who speak English and live in Japan? japanise life still and freind  is the best way to make new friends.

Meet Japanese women – Meet Japanese women for dating – Meet Japanese women for marriage – Meet Japanese women for chat.

meet japanese women
Looking to meet Japanese women, Japanese women who are looking for western men for dating, relationships or marriage. You can meet thousands of beautiful Japanese women through Japanese Lifestyle Friends who are interested in western men. These Japanese women can speak English and are interested in travel.

Meet 10x more Japanese Women

Just by including a picture in your profile in Japanese Lifestyle Friends you will increase the number of Japanese women who will communicate with you by a factor of 10. Japanese women do not like to reply or contact men who do not have a photograph in their profile. Even if you don’t think you have Hollywood looks, including a photo is still going to improve your odds with Japanese women. Try to include at least one head and shoulders shot. Spend sometime taking some good photographs. Get a friend to help you out and take lots of photographs. Remember professional photographers take many photographs simply to improve the odds of obtaining a few good ones. Things to avoid with photographs are: messy or busy backgrounds, fuzzy web cam pictures, pictures with ex-girlfriends, female friends or sister as they are bound to cause doubts in Japanese women’s minds.

WOMEN JAPANESE – Women Japanese looking for western men for dating, relationships or marriage. We have thousands of attractive Japanese women to meet who are interested in western men. These women Japanese can speak English and are interested in travel. Free registration and free profile with photos. You will be amazed by the quality of the Japanese women we have in Japanese Lifestyle Friends.

 is easy to start your Japanese dating with japanese lifestyle freind. Our advanced online search system allows you to search for friends by: location including city, ethnicity, languages spoken, age, gender and gender preferences, type of friendship they are interested in and many more criteria.

Using this easy to use system you will be making many great new friends in Japan in almost no time. It is free to registration and post a profile with your picture on   see article beside

Lose Fat and Gain Muscle with Turbulence Training

Lose fat and gain muscle without cardio. Discover the cardio free fat loss workouts using weight training exercise and interval training to burn fat, get rid of stubborn belly fat, and build muscle.

Revealed…

5 Fat Loss Myths: Why Long, Slow Boring Cardio is not the Best Fat Loss Program to Increase Your Metabolism and Burn Belly Fat…

By Craig Ballantyne, Men’s Health Magazine Expert, Certified Strength & Conditioning Specialist, and Author of Turbulence Training

Myth #1 – You Have to Do Cardio in the Morning on an Empty Stomach in order to Burn Fat

There is no fat loss magic to doing cardio on an empty stomach. In fact, most trainers “in-the-know” are using intervals instead of slow, boring cardio to help their clients burn fat fast. Plus, who wants to be doing boring cardio at 6am while their stomach is rumbling? If you could find better home fitness workouts to burn fat, wouldn’t you do those instead?Myth #2 – You Have to Do Cardio in the Fat Burning Zone

By exercising in the fat burning “Zone”, as some folks like to call it, you only burn a few extra calories than if you weren’t doing any exercise at all! Slow, boring cardio workouts are not the best way to lose belly fat. If you truly want to change your body, you need to use short, burst exercise home fitness workouts.Myth #3 – You Have to Do Cardio 7 Days Per Week

You don’t need to workout everyday. The truth is, you only need to do 3 short home fitness workouts per week of 45 minutes.

Myth #4 You Have to Do Cardio for at Least 20 Minutes Before You Start Burning Fat

We’re burning fat all the time, even while you sit here and read this message. Sure, exercise increases our fat burning, but it’s not as though the first 20 minutes of any workout don’t burn fat. That makes no sense at all! I’ll show you how the short, burst exercise system helps you achieve more fat loss in less than half the time of a regular cardio workout.Myth #5 – You Can’t Lose Fat and Gain Muscle at the Same Time

Scientific research and my experience says, “Yes, you can!” A recent study found that men and women can gain muscle and lose fat at the same time if they use a component of my Turbulence Training system.

o discover the short, burst exercise system that will help you boost your metabolism, increase your fat loss, and burn belly fat, and then make your choice below…see article on right side

Acne can affect people from ages 10 through 40 and up

Acne can affect people from ages 10 through 40 and up. Acne can show up as any of the following; congested pores, whiteheads, blackheads, pimples, pustules, or cysts (deep pimples). These blemishes occur wherever there are many oil (sebaceous) glands, mainly on the face, chest, and back. It is important to seek medical advice early since medical treatment can improve your appearance and prevent the treatment depending on the type and severity of the acne. Treatment includes oral medications like antibiotics as well as creams and lotions for application on affected areas.

If you are suffering from acne, it is important that you remove surface oil from the face by washing with soap and water or with medicated cleansers. Remember to wash frequently when the face is oily, about three times a day. Continue washing even when you acne is cured. And always remember not to squeeze or scratch pimples.

The important thing to have when it comes to treating acne is patience. Most of the treatment options for acne may take 2 or 3 months to start working. It is therefore important to give each regimen or drug enough time to work before giving up on it and moving on to other treatments.

Remember that middle-school classmate who swore that a dab of toothpaste was the best way to zap a zit? She was wrong, says Dr. Doris Day, a New York City-based dermatologist. A lot of “home remedies” for acne don’t help and can even make the problem worse. Here are some of most misguided self-treatments she’s seen.

Picking at the Problem. Using your hands to pick at a pimple is one of the worst things you can do for acne. It increases risks of scarring and of the acne coming back in the exact same spot. Picking can also make the inflammation worse and raises the risk of introducing infection into the open sore, Day says. “It just makes [the acne] mad, basically,” she says.

Neosporin. Day says some people assume that because Neosporin works as an antibiotic for cuts, it’ll also kill the bacteria that causes acne. That’s not the case. The ointment clogs pores, has no effect on acne-causing bacteria and can’t even reach the base of the skin’s follicle, where acne actually forms. Any noticeable improvement is actually due to Neosporin’s emollient nature; often the area around the pimple is dried out and Neosporin softens and moisturizes it, making it look better.

Toothpaste. “It’s meant to dry out the pimple a little faster,” Day says, but don’t go for this home remedy. Newer toothpastes are usually equipped with ingredients aimed at controlling tartar, and those chemicals provide “food for the bacteria”—exacerbating acne—or irritate the skin further, making it red and inflamed and sometimes resulting in peri-oral dermatitis, which can cause itchy red patches around the mouth and nose.

Avoiding grease. Staying away from oily foods won’t keep your skin from being oily. “There are no studies that we’ve been able to identify that show fried foods make your skin break out,” Day says. Similarly, chocolate and spicy foods have no known effect on acne. There’s one caveat: in a very small percentage of the population dairy can make acne worse because of the hormones from the cows. But “that’s not the typical person,” she says.

So what does work? Day says that a dermatologist may prescribe a Retin A-based ointment, which helps skin cells slough off and regenerate, but these can be too strong for some skin types. There are milder over-the-counter retinoid ointments and creams such as Retin-A Micro. Acne face washes and creams can be useful, but be sure that they have benzoyl peroxide or 2 percent or less salicylic acid for the best results. And, says Day, there’s Thermaclear—a device sold for home use that that zaps pimples with a burst of concentrated heat. Finally, she adds, managing stress and controlling hormonal imbalances (some doctors may recommend the birth control pill to women with severe acne) can also help.

 

Natural Acne Treatment Cure – Natural Ingredients to Stop Pimples Naturally

Acne may be caused

by a variety of factors. It is commonly attributed to an unhealthy lifestyle. This can be a result of eating the wrong kinds of foods like fast foods and processed foods or drinking alcohol. Trauma, stress and other mental and psychological instability triggers the worsening of acne.

There are several components which are proven effective in fighting pimples. One of them is the constant ingestion of Vitamin E in one’s diet. Vitamin E is a known proponent of skin regeneration. This is why most beauty products boast of it in their ingredients.

Did you know that Aloe Vera can be used to treat your pimples? The water in aloe vera has enzymes that have relaxing and anti-bacterial properties that are very effective in clearing pimples. The good thing is that it can also be taken internally to help clean up and detox the digestive tract. A good liver after all attributes to good skin.

Zinc enhances our immune system. It can be taken in capsule form. It is highly advisable if you want your skin to repair any form of damages inflicted by the infection of pimples as soon as possible.

Vitamin A tablets is not only good for the eyes, like Vitamin E. It is also beneficial for the skin. It promotes a healthy glow for the human skin with little tints or red.

These components are known to fight acne. So make sure to include it on your daily diet if you really desire a flawless skin.

Learn more natural acne remedies with . Learn how to cure your acne problems in 3 days. Read my  for more information

Acne may be caused by a variety of factors. It is commonly attributed to an unhealthy lifestyle. This can be a result of eating the wrong kinds of foods like fast foods and processed foods or drinking alcohol. Trauma, stress and other mental and psychological instability triggers the worsening of acne.

There are several components which are proven effective in fighting pimples. One of them is the constant ingestion of Vitamin E in one’s diet. Vitamin E is a known proponent of skin regeneration. This is why most beauty products boast of it in their ingredients.

Did you know that Aloe Vera can be used to treat your pimples? The water in aloe vera has enzymes that have relaxing and anti-bacterial properties that are very effective in clearing pimples. The good thing is that it can also be taken internally to help clean up and detox the digestive tract. A good liver after all attributes to good skin.

Zinc enhances our immune system. It can be taken in capsule form. It is highly advisable if you want your skin to repair any form of damages inflicted by the infection of pimples as soon as possible.

Vitamin A tablets is not only good for the eyes, like Vitamin E. It is also beneficial for the skin. It promotes a healthy glow for the human skin with little tints or red.

These components are known to fight acne. So make sure to include it on your daily diet if you really desire a flawless skin.

Acne Natural Treatment

 

 

Acne is the most common skin disorder which predictably occurs first during the teenage. It is estimated that over 70 percent adolescents are affected by a recognizable form of acne.

Natural Treatment or Remedies for Acne

Tea tree oil, which is also commonly known melaleuca oil, is an essential oil that can appear clear in color to a light golden shade. This natural acne fighting oil has been growing in popularity over the last few years as an effective alternative to over the counter and prescription blemish treatments.

Apply Aloe Vera gel or Aloe-Vera juice to the affected area. Not only is Aloe Vera a great anti-inflammatory agent, it also has anti-bacterial properties which makes it an ideal home remedy for acne.

Thyme and lemon lotion Boil several sprigs of fresh thyme in 2 cups of water for two minutes and leave to infuse for five. Strain and add the juice of 1/2 lemon, Use this to rinse the face at least twice a day.

Make this essential mask to get rid of acne fast – take few drops of essential oil, use a mask base powder like fuller’s earth or kaolin powder and then get some mineral water or rosewater to make a paste. Mix 1 heaped tsp of base powder to few drops of essential oils. Add about 2 tbsp of the water in, to make a fluid though ideal paste. Apply this onto acne to cure.

Extract juice from fresh mint leaves and use it on the acne-affected area of the skin/body daily at night. This also works well for eczema, insect-stings, and scabies. Another way of using mint as a home remedy for acne is to mix its juice with a little turmeric powder. Leave this mixture on the affected area for 15 to 30 minutes before washing with clean, tepid water.  

Oregon grape (Mahonia aquifolium) It has antibiotic properties and helps stimulate the immune system. Take one of the following three times daily: tea from dried root (2-4 grams); tincture (6-12 ml or 1.5-3 teaspoon); fluid extract (1-2 ml or 0.25-0.5 teaspoon); solid powder of 8-12% alkaloid content (250-500 mg.).

Fenugreek paste treatment – aside from using its seed to make curry powder, fenugreek, through its leaves, can be a useful treatment for acne.  Making a paste out of its leaves, you can produce a facemask that can be applied at night to prevent pimples and blackheads.

Make a paste of fresh methi (fenugreek) leaves. Apply it over the face every night for 10-15 minutes and washed with warm water. This will prevent pimples, blackheads, and wrinkles.

Mixing a mask base powder, such as fuller’s earth or kaolin powder with a few drops of essential oils, making it into a

 

 

 

 

 

 

paste using distilled or filtered water and using it as a face mask will not only clear acne, but give your skin a smooth and soft texture.

Mix one teaspoon of ground nutmeg with one teaspoon honey and applying it to the acne areas. This application on the face should be maintained for 20 minutes and then washing it with cool water will have effective results. Twice a week on regular basis will show improvement

Here are 7 tips that can help you get rid of acne fast:  

1. Never pop or squeeze your pimples. I know it’s very tempting to pick at your spots, but if you do it the bacteria will spread all over your face causing a severe breakout and possibly permanent scarring.
2. Consume more fruits and vegetables. Your diet is a very important factor, if you want to cure pimples. Fruits and vegetables can help you eliminate one of the main causes of this skin condition: the buildup of toxins.
3. Use a gentle cleanser. Wash you face with a soap for sensitive skin and always be gentle. Don’t wash your face too often or scrub it too hard, because you will make your condition worse.
4. Drink plenty of water every day. Drinking at least 8 glasses of water each day, will help your body to get rid of unwanted toxins and prevent blemishes.
5. Choose the right makeup. Don’t use oil based makeup because it will clog the pores and cause more breakouts. The same thing applies to oil-based sunscreens and concealers.
6. Don’t touch your face too much: many acne sufferers make this mistake. You should always clean your hands thoroughly before touching your face to avoid spreading any bacteria.
7. Apply homemade remedies: there are many effective homemade remedies that can help you fight pimples. For example applying an ice-pack over a zit can reduce the swelling and the redness. Also tea tree oil, tomato pulp, ginger and salted water can be very effective.Here are 7 tips that can help you get rid of acne fast: 
   1. Never pop or squeeze your pimples. I know it’s very tempting to pick at your spots, but if you do it the bacteria will spread all over your face causing a severe breakout and possibly permanent scarring.
   2. Consume more fruits and vegetables. Your diet is a very important factor, if you want to cure pimples. Fruits and vegetables can help you eliminate one of the main causes of this skin condition: the buildup of toxins.
   3. Use a gentle cleanser. Wash you face with a soap for sensitive skin and always be gentle. Don’t wash your face too often or scrub it too hard, because you will make your condition worse.
   4. Drink plenty of water every day. Drinking at least 8 glasses of water each day, will help your body to get rid of unwanted toxins and prevent blemishes.
   5. Choose the right makeup. Don’t use oil based makeup because it will clog the pores and cause more breakouts. The same thing applies to oil-based sunscreens and concealers.
   6. Don’t touch your face too much: many acne sufferers make this mistake. You should always clean your hands thoroughly before touching your face to avoid spreading any bacteria.
   7. Apply homemade remedies: there are many effective homemade remedies that can help you fight pimples. For example applying an ice-pack over a zit can reduce the swelling and the redness. Also tea tree oil, tomato pulp, ginger and salted water can be very effective.Here are 7 tips that can help you get rid of acne fast: 
      1. Never pop or squeeze your pimples. I know it’s very tempting to pick at your spots, but if you do it the bacteria will spread all over your face causing a severe breakout and possibly permanent scarring.
      2. Consume more fruits and vegetables. Your diet is a very important factor, if you want to cure pimples. Fruits and vegetables can help you eliminate one of the main causes of this skin condition: the buildup of toxins.
      3. Use a gentle cleanser. Wash you face with a soap for sensitive skin and always be gentle. Don’t wash your face too often or scrub it too hard, because you will make your condition worse.
      4. Drink plenty of water every day. Drinking at least 8 glasses of water each day, will help your body to get rid of unwanted toxins and prevent blemishes.
      5. Choose the right makeup. Don’t use oil based makeup because it will clog the pores and cause more breakouts. The same thing applies to oil-based sunscreens and concealers.
      6. Don’t touch your face too much: many acne sufferers make this mistake. You should always clean your hands thoroughly before touching your face to avoid spreading any bacteria.
      7. Apply homemade remedies: there are many effective homemade remedies that can help you fight pimples. For example applying an ice-pack over a zit can reduce the swelling and the redness. Also tea tree oil, tomato pulp, ginger and salted water can be very effective.
      8. http://belimbing4.mrxacne.hop.clickbank.net/